Default Machine Model | Nayax Core
Configure and apply Machine Models in Nayax Core to pre-populate machine settings at creation or push default configurations to existing machines using Load Defaults.
FAQ
Description
Machine Management › Nayax Core
Default Machine Model | Nayax Core
Understand what Machine Models are in Nayax Core, where to create and manage them, and how to apply them to new or existing machines.
What is a Machine Model?
QWhat does a Machine Model do?
A Machine Model is a collection of attributes and settings that acts as the default configuration for a machine in Nayax Core. When you create a new machine, the Machine Model pre-populates its configuration fields, reducing manual setup time and ensuring consistency across your fleet.
Note: A Machine Model's name does not need to match the physical machine the Nayax device is placed in. Some databases and regions include default Machine Models that can be applied across a wide variety of physical machines.
FAQ
How Is a Machine Model Applied?
QWhen is the Machine Model applied during setup or after?
There are two scenarios depending on when you select the Machine Model:
Important: If you change the Machine Model on an existing machine, you must run the Load Defaults action. Without it, the new configuration will not be applied to the device.
Result
What you should see: After selecting a Machine Model and running Load Defaults on an existing machine (or saving a new machine with a model selected), the machine's configuration fields reflect the default settings defined in the Machine Model.
FAQ
Did you find this article helpful?