How to Activate a Multi-Residential EV Meter Pay / Pay² Charging Station | VPOS Media 4
When you power on the VPOS Media 4 Mini charging Station for the first time, the following steps will guide you through the onboarding process. Please follow the instructions on each screen carefully to complete the setup.
Video Guide
Welcome Screen
Image Attached
WiFi Configuration
Image AttachedView the list of available WiFi networks
- Select your network from the list
- Enter your WiFi password if required
- Tap Connect
Alternatively: Tap Skip if you don't want to connect to WiFi
Select Device Language
Image AttachedThe default language is set to English. To change the default language, tap the dropdown arrow as highlighted next to “English,” and choose your preferred language.
Set Charger Usage
Image AttachedSelect the charger usage configuration: Tap 'Public' for public access or 'Multi-Residential Use' for a closed area.
Operator ID
Image AttachedNote: This step applies to CSMS users only
Server Setup
Image AttachedPlease Note: The OCPP URL settings can be changed after setup on the device OCPP Configuration settings screen.
EVSE Configuration: Configure Current Limit
Image AttachedSelect the appropriate current limit for your setup from the options as highlighted:
- No Limit
- DLM (Dynamic Load Management) Default
- Custom (16A)
Select Power Phase
Image Attached- Single Phase
- Three Phase (default setting)
Ready to Charge
Image Attached
Thank you!
Did you find this article helpful?